National 1625m 3000 Hp Drilling Rig

NATIONAL 1625M

3000HP DRILLING RIG

Item No. : 10106

Location : Texas, USA

DRILLING RIG SPECIFICATIONS :

DRAWWORKS : 

• NATIONAL 1625M POWERED BY (3) GE752 TRACTION MOTORS, BAYLOR ELMAGO 7838 WITH BRAKE

MAST : 

• 147FT DRECO CANTILEVER WITH 750 TON CONTINENTAL BLOCK, 1,500,000 LBS PULLBACK AND 800,000 LBS SET BACK

TOP DRIVE : 

• VARCO TDS 4 TOP DRIVE WITH VARCO HPU UNIT

SUBSTRUCTURE : 

• DRECO SUBSTRUCTURE 30X34X68 WITH GARDNER DENVER 37-1/2” ROTARY TABLE

SILICON CONTROLLED RECTIFIER (SRC) HOUSE : 

• OMIRON 4X4

GENERATOR SETS : 

• FOUR (4) CATERPILLAR 3512B ENGINES WITH KATO GENERATORS, MODEL #6P6-3150 600 VOLT 1204KW – ALL GENSET HAVE LESS THAN 5000 HOURS

MUD PUMPS : 

• Three (3) GARDNER DENVER PZ11 1600HP MUD PUMPS EACH PUMP IS POWERED BY (2) D79 TRACTION MOTORS

MUD PITS : 

• FIVE (5) TANK MUD PIT SYSTEM WITH (5) BRANDT KING COBRA SHALE SHAKERS, MUD GAS SEPARATOR, (2) 500 BARREL WATER TANKS, BRANDT VACUUM VDG DEGASSER, SWACO 3 CONE DEGASSER, SWACO 10 CONE DESILTER, SWACO 12 CONE DESILTER

BLOW OUT PREVENTER (BOP) SYSTEM : 

• CAMERON 13-5/8 TUPE UM 10,000 LB DOUBLE RAM BOP, SHAFFER 13-5/8 ANNULAR 5,000 LB BOP, CAMERON 13-5/8 TUPE UM 10,000 LB SINGLE RAM BOP, KOOMEY ACCUMULATOR, MUD CROSS 13-5/8 X 34H, CHOKE MANIFOLD 10,000 LBS

CATWALK : 

• FORUM 3500 GEN 1 HYDRAULIC CATWALK

EXTRAS : 

• THREE (3) GARDNER DENVER AIR COMPRESSORS, BRADEN WINCH AIR HOIST, TWO (2) INGERSOLL-RAND AIR HOIST MODEL# K5UL, HYDRAULIC CAT HEAD, NATIONAL BREAKOUT CATHEAD, NATIONAL TYPE A CATWORKS, H&P CHANGE HOUSE/MEETING ROOM, NATIONAL DEADLINE ANCHOR, H&P TOP DRILLRS HOUSE, DRILLING LINE SPOOL RACK, FUEL TANK 8,000 GALLON, TWO (2) INGERSOLL-RAND MAN RIDER MODEL # FA25AMR, HOOK BECKET ASSY 500 TON, HPU UNIT-ABERDEEN, PARTS AND LUBE HOUSE WITH MANAGER HOUSE, NATIONAL TORQUE CONVERTER, WIRE LINE UNIT